The Robobrew is an all-in-one electric brewing system that has built in heating elements, a built-in water resistant temperature control panel, a removable grain basket, and a built in spigot for transferring your wort. This unit is extremely portable and uses a 110v hookup so it can be used anywhere there is standard power outlet that supports 110v.
Two separate heating elements with individual switches allow for more control over the heating and boiling process. One 1000 watt element and one 500 watt for a combined 1500 watts! Use both when you really need to ramp up the temperature or only one at the start to get to your mash temp.
The digital temperature control panel makes it simple to see the current temperature and to set the temperature where you want. You can also set a delayed start of up to 23 hours in advance so that you can have your water hot and ready to go when you get home from work or get up in the morning. This is key for anyone with more to do than time to do it. The digital temperature controller is also water resistant, so don't worry about spills or some water dripping down the side. This controller is built for brewing!
The Robobrew also includes a stainless steel malt pipe with a false bottom that allows you to easily switch from mash tun to boil kettle during your brew day. The malt pipe includes a handle for lifting and tabs at the base so you can set the malt pipe over the RoboBrew and let the wort drain out. It also has feet at its base to raise the malt pipe slightly off the base and help prevent clogging.
The included stainless wort chiller is shipped with bare ends so you can set it up according to your situation. Listed below are the most common tubing and fittings sold to help connect to a hose, hose bib, or faucet.
Note: The manual references a single element and is intended for a different market. This unit comes with a two heating elements for a total of 1,500 watts.